Skilful. Accentuated.

A HARMONIOUS SOLUTION

Spruce
Larch
Stone Pine
Oak
Oak white finger-pointed
Retro hacked H2
Reclaimed wood hacked H3

NEW POSSIBILITIES FOR ACOUSTIC AND VISUAL INTEROIR DESIGN

The natural ecological structure and low weight per unit area make it ideal for new construction as well as renovation. But it would not do the Admonter name justice if design were to take a back seat in these sophisticated acoustic elements. The Admonter acoustic elements open up new possibilities for acoustic and visual interior design. The eye sees only a part thereof; the rest is seen with the ears!

Фото интерьеров
Admonter Mustertool Admonter ROOMZ
 
Construction

CONSTRUCTION

  • Solid wood top sheet (cutting geometry: 15 mm web – 3 mm slot)
  • 30 mm honeycomb core
  • Acoustic fleece rear lining (simultaneous trickle protection)
 
Aufbau_1800x316.png
The acoustic room design

REVERBERATION TIME AND SOUND ABSORBATION

Whether a room is perceived as acoustically pleasant largely depends on the reverberation time. The reverberation time indicates the period of time that a sound event requires in order to be inaudible. Through the proper use of sound-absorbing materials, the room acoustics can be specifically tailored to the purpose of the room. Often, however, the design trends in modern architecture, such as open spaces, minimalist furnishings and vast glass and concrete surfaces, pose major challenges to designers and architects when it comes to pleasant room acoustics. Admonter Acoustics has a solution to offer!

PLANNING

By varying the overall construction height (distance to the ceiling and type of damping), acoustic properties matching the respective requirements can be created. In order to achieve the optimal auditory effect for the individual spatial situation, it is recommended to consult a designer with expert acoustic knowledge or an acoustician at an early stage.

PROCESSING
  • Efficient and simple machining with conventional woodworking machines
  • Concealed, tool-free installation by means of the Admonter ACOUSTICs fastening system or
  • Direct fastening with clips or clinched nails through the MDF tongue
  • See the installation instructions for details
TECHNICAL INFORMATIONS
  • CE marking according to EN 13964
  • Profile: all-round groove with MDF tongue for continuous installation
  • Reaction to fire according to EN 13501: D-s2, d0
  • Sound absorption class according to EN 11654: A
  • Sound absorption coefficient according to EN 11654: W 1,00
  • Acoustically open area: 17.5%
  • Surface weight / element: approximately 4,4 kg/m2
  • Surface: raw or naturally oiled
  • Can also be used on radii and bends
  • Free of pollutants and respirable fibres
  • Vapour diffusive
  • Ambient area: room temperature 10 - 30°C / humidity 25 - 65% / (short-term exceeding or undershooting possible)